| Item No. |
PHOTO |
DESCRIPTIONS |
| 3001 |
 |
Drawworks Sensor: Power 8VDC,Promixity swithes on drawworks,output pulses 3-8 V, Massure range 48 or 120 pulses / turn of drawworks drum,Sensitivity:1 pulse. Certification:Eex ib IIC T6. |
| 3002 |
 |
Drawworks Sensor: Power 8VDC,Promixity swithes on drawworks,output pulses 3-8 V, Massure range 48 pulses / turn of drawworks drum,Sensitivity:1 pulse. Certification:Eex ib IIC T6. |
| 3003 |
|
Signal Convert：Current to Encoder or Drawworks Signal.0-20ma Convertible To Encoder Drawworks Signal
Analog Signal Convert To Pulse Type Signal0-20ma Convert To 0-2500 Pulses 0-5000 Pulses And 0-10000 Pulses.
Input Sinal 0-20ma .Output Sinal Encoder / Drawworks |
| 3004 |
 |
Voltage/Current to Frequency Converter
3-way Isolation of Input / Output Signals
Universal Conversion Module - Inputs and Outputs Selected via DIP Switch Settings
Ultra Slim Design – Only 0.244" Wide
19 to 30 VDC Power |
| 3005 |
 |
Rotary Torque ( Hall Effect clamp ): Power:24VDC Output:4-20mA.Meassure range:1000Ampere. |
| 3005-1 |
 |
Rotary Torque ( Hall Effect clamp ): Power:24VDC Output:4-20mA.3 Wires. Meassure range:1000A AC/DC |
| 3006 |
 |
Rotary Torque ( Hydraulic ): For any type rig Used on chain-driven rotary tables and fitted to the hydralic circuit of the drive chain tensioner. Power:24VDC,Output:4-20mA.Meassure range:0-5 MPa. Certification:Exd IIC T6 |
| 3007 |
 |
H2S Sensor(Electrochemical Cell): For locations external to the mud logging unit,the H2S sensors are pre-mounted in an explosion-proof or enhanced-safety junction box. The sensor is normally mounted facing down, with a protective baffle installed water antry during operation. Power:24VDC.Output:4-20mA Mearssure range:0-50ppm,0-100ppm,0-200ppm or higher. Certification:Exd IIC T6 |
| 3008 |
 |
H2S Sensor ( Metal Oxide Semiconductor ): For locations external to the mud logging unit,the H2S sensors are pre-mounted in an explosion-proof or enhanced-safety junction box. The sensor is normally mounted facing down, with a protective baffle installed water antry during operation. Power:24VDC.Output:0-10VDC, Mearssure range:0-100ppm. |
| 3009 |
 |
Co2 Detector: Installation in mudlogging unit. Power:220VAC 50/60Hz. Output:4-20mA,0-20mA,1-5VDC.Maesure Range:0-100%. |
| 3010 |
 |
Mud Conductivity (Resistivity) Sensor IN/OUT: The conductivity of the fluid is determined by meadurig the current induced in the sencendary of a pair of toroidal coils,The coupling of which is ensured by the fluid itself.Power:24VDC,Output:4-20mA,Measure Range:0-300mS. Certification:Exd IIC T6 |
| 3011 |
 |
Pressure Sensor:For Hook Load ( Weight on hook ),Rotary Torque Hydraulic,Standard Pipe pressure, Casing/Well Head / Choke Line Pressure,cement Unit Pressure. Power:24VDC.Output:4-20mA. Pressure Range:0-5MPa,0-40MPa,0-70MPa,0-100MPa. Connector Type:1/4"NPT,1/2"NPT,M20 x 1.5. Certification:Exd ia IIC T6 |
| 3012 |
 |
American 1502 High-Pressure Union Pressure Sensor: |
| 3013 |
 |
American 1502 High-Pressure Union Pressure Sensor: Pressure sensor derectly contact drilling mud For Standard Pipe pressure, Casing/Well Head / Choke Line Pressure,cement Unit Pressure. Power:24VDC.Output:4-20mA.
Pressure Range:0-5MPa,0-40MPa,0-70MPa,0-105MPa. |
| 3014 |
 |
LINE TENSION TRANSDUSER: Load cell type.LOOP POWERED ,4-20mA Model:XLD 100k-45T Load cell type – line tension sensor, cap: 100,000 lbs(42 Tone), Power supply 24VDC.4 -20 mA output .Operating range: -30 to +60 ℃; |
| 3015 |
 |
Mud density Sensor IN/OUT: measurement is made by two pressure sensors positioned a fiex distance apart and immersed in the fluid. Monitoring the density of fluid circulating in the wellbore is essential for general safety and efficent drilling performance. Power:24VDC,Output:4-20mA.Measure Range:0.5-3.0 kg/l. Accuracy:0.01 kg/l. |
| 3016 |
 |
Mud Flow Out Sensor (Paddle): Installation on the flow line.Power Supply: 24VDC,Output:4-20mA,Maesure Range:0-100%. Certification:Exd IIC T6 |
| 3017 |
 |
Electromagnetic Flowmeter Sensor IN/OUT: Installation:The mud injection and return lines must be modified to accept the flow metering equipment,and installed in an arrangement that ensures that they are full of drilling fluid at all times during operation. EEx certified. Working pressure:40 MPa. Power:24VDC or 220VAC.Output:4-20mA or 0-5VDC. Measure Range:0-2300 l/min. |
| 3017-1 |
 |
Electromagnetic Flowmeter Sensor IN: Installation:The mud injection and return lines must be modified to accept the flow metering equipment,and installed in an arrangement that ensures that they are full of drilling fluid at all times during operation. EEx certified. Working pressure:40 MPa. Power:24VDC or 220VAC.Output:4-20mA or 0-5VDC. Measure Range:0-2300 l/min. |
| 3018 |
 |
Pit Level Sensor / Mud Flow Out Sensor: The sensor emits an utrasonic wave which is bounced back from the surface of the liquid.precise measurement of the time taken for the wave to return gives the distance between the sensor and the level of liquid. Power:24VDC,Output:4-20mA,Measure Range:0.3-5 meters. Certification:EEx ia IIc T4.IP 66. |
| 3019 |
 |
Mud Temparetur Sensor IN/OUT: Temperature sensor are usually placed in the suction pit ( Temperature IN ) and in the flow line ( Temperatur OUT ). Power:24VDC.Output:4-20mA.Measure Range:0-100 degreec. Certification:Exd IIC T6 |
| 3020 |
 |
Rotary Speed ( RPM ) Sensor / Pump Strokes Sensor: The proximity sensor is an easy and reliable way to count pump strokes and revolutions of drilling string ( RPM ). Power:8VDC,Output:pulses. Measure Range 0-500 SPM. Sensitivity:1 pulse / min. Certification:EEx ia IIC T6. IP 66 |
| 3021 |
 |
Heave Sensor / Hook Position Sensor: The vertical motion of floating vessels due to sea movements interface with the accurate measurement of vertical drillpipe motion in relation to the borehole. A cable from the heave sensor to the riser, Or to the rig's heave compensator,Causes a wheel to rotate as the drilling vessel rises and falls.Power:8VDC,Output:pulses or 4-20mA or 0-10VDC. Measure Range:0-40 meters. Certification:EEx ia IIC T6. |
| 3022 |
 |
Drilling Floor Monitor Cabin: Mudlogging repeat monitor installation inside Cabin on the drilling floor.The driller easy to watching all the mudlogging Data. The monitoring system provides an integrated display with current information on drilling parameters and mud system values during drilling, tripping and other critical rig operations. |
| 3023 |
 |
Automatic Calcimeter: Calcimeter is a rugged, fast and accurate way to determine limestone and dolomite content of samples. Digital and chart output. Direct reading and porcentaje(%) of CaCO3 and CaCO3, MgCO3. Built–in magnetic mixer drawer for consistent analysis. Easy to use and calibrate. Computer Inteerface: USB connection. |
| 3024 |
 |
Shale Density:
Shale density determination has often proved to be very effective in determining the degree of under compaction and consequent abnormal pore pressure in shale bodies. Shale density determination can be of great value since it provides information on the compaction of the shale. Under normal conditions, shale density should increase with depth. Any sudden decrease in shale density (as porosity increases) may indicate abnormal pressure does exist.
|
| |
